Order Operations Management Help

January 4, 2023

Order Operations Management Help

Order Number	636738393092
Type of Project	ESSAY
Writer Level	PHD VERIFIED
Format	APA
Academic Sources	10
Page Count	3-12 PAGES

Instructions/Descriptions

Order Operations Management Help

2. Assess the approximate proportions of Frederic’s time that is spent on long-term and on short-term issues. Do think this is typical of operations managers in other industries (for example, banking, leisure, automotive component manufacture)?

3. What is Frederic’s involvement in technology acquisition decisions? What are his main concerns when evaluating the capability of new equipment?

A day in the life of Frederic Godé, Operations Manager, BonPain

Frederic Godé is the Operations Manager of one of France’s largest bakeries, BonPain,

Orleans, which supplies supermarkets throughout Europe with frozen, ‘par-baked’

(part-baked), French-style bread and patisseries (decorative pastries often incorporat-

ing fruit, nuts or jam). After delivery, these are thawed and re-baked in-store, providing

delicious aromas and fresh-tasting, traditional-style products to Europe’s quality-

conscious consumers.

BonPain’s largest volume of products comprises a range of baguettes (French sticks),

which are made, baked and frozen on three high-volume, specially-built production

lines. However, even for baguettes there is a very wide range of recipes and packaging

requirements, so these lines have to be set-up for these differences several times per

shift. The lower-volume, more complex patisseries and speciality breads are made in

batches, and are hand-assembled and finished prior to baking in batch ovens and

freezers. The total range of products comprises around 600 stock-keeping units (SKUs),

most of which are bulk-packed and stored in BonPain’s freezers for up to a maximum

of four weeks. There is also a relatively small, flexible kitchen where new products are

being carefully developed by experienced chefs, who have a clear understanding of the

materials and processes to be used in full-scale production. This facility is an extremely

important ‘order-winner’ when dealing with supermarkets which require a regular

supply of attractive and tasty new products.

Frederic Godé recently attended a time management course arranged by the Human

Resources department of the large international food manufacturing group which had

acquired BonPain one year earlier. Reflecting on this course in the context of the com-

plexity and variety of his daily job, Frederic decided to carry a dictaphone around for a

day and record what he actually did. He chose a Wednesday in mid-October, which he

considered would be a typical day in his working life. Later, his secretary carefully tran-

scribed the tape as follows …

7:55

Arrived at work, parked, walked to office.

8:00 to 8:15

Checked e-mail which included:

● Productivity report for yesterday’s output (obviously well below target!).

● Quality report for last week, unfortunately showing above-average levels of scrap.

A day in the life of Frederic Godé, Operations Manager, BonPain

● A note from the night-shift plant engineering supervisor, reporting a serious four- hour

breakdown during the night on the fastest baguette line. He contends that this was

not the result of any lack of maintenance; it had apparently been caused by a failure

of the production operatives to stop the machine quickly and correctly when the

conveyors were jammed by a major material spillage.

● A note from Warehousing and Dispatch reporting that today’s routine deliveries to our

largest customer, Hypera (a supermarket group), could not be delivered at the

scheduled times because of the production breakdown.

● One from an external equipment supplier, F-Robot, confirming their technical consul-

tant’s visit today at 11:30 to discuss one of the latest automation projects at the plant

● A request from Charles Lamouche, the Marketing Director, for an urgent discussion

about production trials for one of the new product introduction projects. Replied,

asking if he would be able to come to my office at 15:00.

8:15 to 9:00

Daily first tour of factory with the morning supervisor and the Senior Maintenance

Engineer.

● During the tour it was pointed out that one of the three baguette production lines

had only just restarted working. It had broken down in the middle of the night due to

a bearing failure.

● Spent about 15 minutes in discussion with a group of production operatives who

were concerned about our regular requests for extra staff to run the third line at the

weekend. Although reluctant to come in, they were persuaded that we did need the

extra output to satisfy demand, which had recently grown by around five per cent

due to an export order for the UK.

● Noted that the finished baguettes from Line 1 (the oldest line) were showing wide

variation in baked colour (but within the control limits) and asked to see the Quality

Control charts, but routine notes on these did not highlight any reason for variations.

Arranged for Pierre Moulin (the Quality Manager) to investigate root cause and to

report back later.

● Was informed that we had run out of prepared apricots yet again, stopping sched-

uled production of the most popular Danish-style patisserie. Reminded me that I need

to discuss this with Purchasing Manager, since this is the third stock-out this week!

● Spotted a guard missing from one of the conveyor drives. Plant Engineer arranging

replacement this morning – temporary guard put in place immediately.

● Excessive flour and fat spillage in mixing room. Appears to be caused by carelessness,

perhaps lack of training of night-shift operatives. Waste of this type severely erodes

our tight profit margins. Will follow this up at meeting.

9:00 to 10:00

Regular scheduled morning meeting with: the three production line supervisors; super-

visors from the mixing department, patisserie assembly and baking areas, and freezer

warehouse; Pierre Moulin, the Quality Manager; and Monique Dumas, the Production

Planning and Control Manager. The normal agenda included an overview of the previ-

ous day’s production statistics, and of the rolling one-week averages including:

● the total output of each main production line

● performance against schedule per specific product

● utilisation and efficiency measures, and graphs showing these over 12 months

A day in the life of Frederic Godé, Operations Manager, BonPain

● records of delivery performance: on-time delivery of ordered quantities

● quality statistics: scrap levels for products and packaging.

Supervisors provided explanations of problems, and occasionally some suggestions on

their resolution and prevention. However, many small improvements were increasingly

being undertaken by kaizen (continuous improvement) teams. Generally, these were

done on a day-to-day basis, without great supervisor intervention.

The meeting then continued by looking at forecast requirements for the next week

and for the next three months. Monique pointed out that the market forecast sug- gested

growth in bread sales of about two per cent per month, but only very slight growth for

patisseries. She was concerned that it would be necessary to arrange increased levels

of overtime to cover this extra demand and that there might be resist- ance from the

operators, since they had already been working excessive levels of overtime over the

last few months. It was certainly the time to consider purchasing a fourth baguette line!

Pierre was concerned that this pressure on output could lead to further deterioration

in quality performance, which could not only create customer complaints, but might also

lead to rising levels of scrap and waste. I also know that Monique is really getting stressed

by the increasing prospect of being unable to meet a big customer’s delivery schedule.

Many supermarkets are trying to reduce their frozen inventory to only one or two days’

demand, so if we fail to deliver, stores could be out of bread and then there will be big

trouble! It’s not made any easier by the pattern of consumer demand – up to twice as

much bread and patisseries are sold in supermarkets on Fridays and Saturdays than on

any other shopping day. We must address these issues when preparing our next

operations strategy report.

I brought the team’s attention to the apparently increasing levels of spilt materials

(on the floor) observed on the morning tour. They agreed that a team would be formed

to look at underlying causes of such waste.

10:00 to 11:30

Mostly alone in my office. I wanted to begin looking at the detail of proposals to auto-

mate the packing lines. If we make the right choice, it should be possible to eliminate

two people per line by the robotisation of final packing. However, the equipment to do

this is very expensive, with the best solutions seeming to be tailor-made for specific

types of bread. This would therefore limit the future flexibility of this equipment.

However, the project looked promising in terms of my calculations of the payback

period, and I was therefore looking forward to the visit of our preferred supplier.

Some of this time spent reviewing Monique’s calculations of the future capacity

requirements of the plant. Use of overtime to provide extra capacity can only continue

for a matter of months before that alone will not provide the solution. It is going to be

necessary to invest in another line sooner rather than later if we are to avoid delivery

problems in the coming spring. I should discuss the market forecast by volume and types

with the Marketing Director, so I rang his secretary and made an appointment to talk

with him this afternoon.

There were four phone calls during this period:

● Packaging supplier to discuss quality problem with one size of folding cardboard cases

supplied in September. Agreed compensation/replacements and process changes

to ensure non-recurrence.

A day in the life of Frederic Godé, Operations Manager, BonPain

● Group’s IT consultant wanted to arrange a meeting with the Production team con-

cerning implementation of new Materials Requirement Planning (MRP) system within

the Enterprise Resource Planning (ERP) project. This would take over inventory con-

trol and placing of call-off orders currently done by two clerks in the Planning and

Control Department.

● Discussion with Charles Lamouche about an opportunity to supply premium quality

baguettes to a major sandwich/coffee bar chain. To win this order would require new

process controls for bread quality, since the texture and general quality specification

is known to be exceptionally demanding for this customer. It expects suppliers to use

statistical process control (SPC) for several variables (weight, dimensions, moisture

content) and attributes (colour, appearance, crustiness). This is much more demand-

ing than the specification of any other customer.

● Message from Sales to expect a call from Sophie Chevalier, the Purchasing Director of

Hypera, who wanted assurances directly from me that today’s delivery problems

would never reoccur. I have met her on several occasions when she first agreed to do

business with us; she and her team had thoroughly inspected our facilities and quality

control systems. I am not looking forward to her call!

11:30 to 12:30

Meeting with technical representatives of F-Robot, along with our Factory Engineer and

Method Study Engineer. My main concern was to understand the flexibility of the pro-

posed robot packers. There appears to be a choice between two types: high speed,

specially-configured machines which can easily keep up with any future output speed of

the improved standard baguette lines; and slower machines which are easy to adapt for

different shapes and sizes of bread and even patisseries. The representatives also

showed us information on state-of-the-art flexible equipment being developed for

assembly of complex food products like patisseries.

We will clearly have to evaluate all these options on the basis of what return on capi-

tal investment could be achieved. However; there are also operations’ issues to be

considered in terms of capacity, flexibility, reliability and ease of maintenance, spare

parts inventory, quality (will they be gentle enough to not cause damage? – trials will

have to be conducted) and training of operators and maintenance staff.

12:30 to 13:00

Lunch in company restaurant. Sat with a group of supervisors from the Patisserie

Production Department. Although generally very friendly and relaxed, I noted that

they seemed to want to move the conversation towards the kaizen activities taking place

in their department. I suggested that two of them come to my office immedi- ately after

lunch!

13:00 to 13:40

Continued discussion on kaizen. The supervisors were obviously still under the impres-

sion that this initiative was undermining their management role in the department since

operatives were analysing problems, assessing solutions and implementing them with

very little input from the supervisors. They were concerned that the operatives would

not need supervision if this continued! I assured them that this was not the case, but

that their role would gradually change and that their continued involvement and atten-

tion to detail was critical to the success of the department. (I must ensure that I sit down

A day in the life of Frederic Godé, Operations Manager, BonPain

with Personnel to work out the future role and training needs of supervisors.) One of

them was clearly under the impression that kaizen was simply a new version of total

quality management – and that had not been a total success when we attempted it five

years ago!

13:40 to 15:00

Another tour of the factory. Spent most of this time looking at SPC charts in each

department because there was some evidence that these were not being used correctly.

We may have to undertake some more training in this area if we are to get the full ben-

efits of SPC.

Then spent some time with the Plant Engineer looking at possible locations for the

installation of packing robots. The current packing area is badly laid out and needs

reconfiguration, so I hope we can combine the installation of new equipment with a

redesign of this area of the factory.

Finally, a short time looking at the freezer room, where we must consider capacity

expansion. The increasing range and volume of product has recently led to a shortage of

storage space. Also, if some of our large customers are moving towards just-in-time (JIT)

deliveries, it may be necessary for us to support this with slightly increased inventory

levels. The time has come for us to do a more detailed analysis of inventory, and if we

leave this too late, we may end up having to rent more expensive storage space at exter-

nal deep-freeze warehouses.

On the way back to the office, passed the training room where a kaizen team was

conducting a brainstorming session. Did not interrupt this.

15:00 to 15:45

Scheduled meeting with Charles Lamouche, Marketing Director, and Sara Lepont,

Product Development Manager, concerning development of a new range of mini-

patisseries. The concept is to supply products of about a third of the normal size, which

can be used at parties and receptions. Market research indicates a big potential growth

in this type of ‘snacking’. However, these products will be significantly more difficult to

make on our existing equipment and will require the development of new recipes and

packaging which would together reduce the drying-out of the products during the

freezing stages. Although the recipes have proved successful in the trial kitchens, the

time had come for full-scale production trials within the factory; most of the meeting

was spent agreeing an outline schedule for this work. I reported on the capital equip-

ment requirements for this project.

15:45 to 17:00

Began writing my monthly report for the monthly Board meeting. This summarises the

production statistics for the previous month, and requires an explanation for any signifi-

cant shortfall. The main problems reported included: lower than budgeted levels of

productivity; and material usage variances which indicate an above-average level of

waste and scrap. I reported on the actions being taken to improve process control. I also

reported that the decline in productivity was largely caused by last-minute schedule

changes which were outside the control of production management.

The next section included details of capital requirements for new equipment needed

over the next two years. Many of these items had already been included in the main

capital budget, but the need for some new items had arisen as a result of changes in

capacity requirements and unforeseen new product developments.

A day in the life of Frederic Godé, Operations Manager, BonPain

I finally reported on each of the new product development projects for which I was

responsible, including a set of Gantt charts showing progress. For each project there was

a short explanation of the successes to date, and the main problems yet to be overcome.

Several phone calls during this period:

● Report from the Quality Manager that the variation in colour of baguettes on Line 1

had now been traced to a faulty burner control in the main oven. The plant mainten-

ance team was preparing to replace the failed component during the scheduled

weekend shutdown of this line.

● Report from the production supervisors in each department on output against daily

target. Each section was on-schedule at this stage in the day. Good!

● Purchasing advised me that there was a potential delivery problem with important

packaging from one of our main suppliers. They had had a serious fire in one of their

plants, and were endeavouring to switch production to another. They assured us that

everything was being done to ensure continuing supply. I phoned Monique to alert her

to this situation, and asked her to continue to liaise with Purchasing.

● The expected call from Sophie Chevalier, complaining about today’s late delivery to

Hypera. Not a pleasant call, so I will not record the details here! The conclusion was

that she will be sending an audit team to look at our planning and control pro-

cedures, and the plant maintenance systems. She is seeking assurance that these

always give priority to production for Hypera. She also wants to know what we are

doing about preventative maintenance (and in particular condition monitoring) so

we will have to give that some attention before her visit!

17:00 to 18:00

Final plant tour. This afternoon I spent most of my time in the patisserie production

area. Everything seemed to be going well, but there was the usual daily build-up of stock

awaiting transfer to the freezer room. There always seems to be a capacity imbal- ance in

this department. For now, the bottleneck is clearly caused by the availability of forklift

trucks and drivers.

There are some material flow problems in this area which will need addressing before

output volumes increase. I must arrange a meeting with the Industrial Engineer and pro-

duction supervisors to discuss the issues and potential solutions. Because of the wide

range of products, it is unlikely that we will be able to automate many of the processes,

but some simple solutions could help to increase productivity.

I am also concerned about the relatively small batch sizes made in this area. The last

time we calculated economic batch quantities for patisseries was about two years ago.

Since then demand has increased significantly, so it may be possible to increase batch

quantities, which would give us greater capacity because of the reduction in the number

of set-ups. We have also recently done some work on reducing set-up time, which will

also have an effect on economic batch quantities.

In general, there is a high degree of specialisation in this area. Many of the operators

do the same job all day, every day. I know that the Human Resource Manager is con-

cerned that this may lead to repetitive strain injury (RSI), so it is appropriate that we

should look to more job rotation and enlargement. This should give more variety in indi-

vidual operators’ tasks, reducing the risks of RSI. This will be included as an important

topic at our next departmental meeting.

A day in the life of Frederic Godé, Operations Manager, BonPain

18:00 to 18:10

Final check of production performance for today. Everything seems to be going well!

Checked e-mail – only one significant new message, from the Operations Director. He is

arranging a meeting with all his managers to begin work on the annual strategic review.

This looks like being a big task ahead for me and the production team.

18:10

End of day, thank goodness. It’s really amazing to see where my time goes! What a range

of different things I seem to have been involved in today. But really, it is like that every

day.

End of taped record!

Questions

1 Analyse the many things that Frederic does during his typical day. You should

group these in terms of the five categories below, and provide a full list of sub-

categories for each:

● Strategic

● Design

● Planning and control

● Improvement

● Other (specify)

2 Assess the approximate proportions of Frederic’s time that is spent on long-term and

on short-term issues. Do think this is typical of operations managers in other

industries (for example, banking, leisure, automotive component manufacture)?

3 What is Frederic’s involvement in technology acquisition decisions? What are his

main concerns when evaluating the capability of new equipment?

4 What main human resource issues are an important part of Frederic’s activities?

5 In what ways can Frederic’s operations contribute to the competitive advantage of

the company?

[Order Now]

RUBRIC

Excellent Quality

95-100%

Introduction

45-41 points

The context and relevance of the issue, as well as a clear description of the study aim, are presented. The history of searches is discussed.

Literature Support

91-84 points

The context and relevance of the issue, as well as a clear description of the study aim, are presented. The history of searches is discussed.

Methodology

58-53 points

With titles for each slide as well as bulleted sections to group relevant information as required, the content is well-organized. Excellent use of typeface, color, images, effects, and so on to improve readability and presenting content. The minimum length criterion of 10 slides/pages is reached.

Average Score

50-85%

40-38 points

More depth/information is required for the context and importance, otherwise the study detail will be unclear. There is no search history information supplied.

83-76 points

There is a review of important theoretical literature, however there is limited integration of research into problem-related ideas. The review is just partly focused and arranged. There is research that both supports and opposes. A summary of the material given is provided. The conclusion may or may not include a biblical integration.

52-49 points

The content is somewhat ordered, but there is no discernible organization. The use of typeface, color, graphics, effects, and so on may sometimes distract from the presenting substance. It is possible that the length criteria will not be reached.

Poor Quality

0-45%

37-1 points

The context and/or importance are lacking. There is no search history information supplied.

75-1 points

There has been an examination of relevant theoretical literature, but still no research concerning problem-related concepts has been synthesized. The review is just somewhat focused and organized. The provided overview of content does not include any supporting or opposing research. The conclusion has no scriptural references.

48-1 points

There is no logical or apparent organizational structure. There is no discernible logical sequence. The use of typeface, color, graphics, effects, and so on often detracts from the presenting substance. It is possible that the length criteria will not be reached.