- Premium Academic Help From Professionals
- +1 757 528 8682
- support@standardwriter.com
Explain purpose of the design project
Explain purpose of the design project
|
Order Number |
2454658998 |
|
Type of Project |
ESSAY |
|
Writer Level |
PHD VERIFIED |
|
Format |
APA |
|
Academic Sources |
10 |
|
Page Count |
3-12 PAGES |
Instructions/Descriptions
Explain purpose of the design project
Explain purpose of the design project and approach
Assembly Project
Activity #2
Once the above items are completed, you (on you own) will complete the following:
- Analyze your piece
- Refer to your drawings (Part 2D in the attachments)
- Is your piece cut to the correct size – make notes where your piece is not the correct size? There is a shortage in the Hight of my part, Also the hole is wider than the hole in the drawing.
- Refer to the geometry of your piece
- Is the geometry of your piece going to cause problems with the assembly? No
Once the above items are completed, you (on you own) will complete the following:
- Analyze your partner’s piece (Part 1D in the attachments)
- Refer to your drawings
- Is your partner’s piece cut to the correct size – make notes where your piece is not the correct size? Yes
- Refer to the geometry of your partner’s piece
- Is the geometry of your partner’s piece going to cause problems with the assembly? No.
Build the report on answering the questions in the rubric below.
Styrofoam Assembly Project
| Grade | Comments | |
| Cover Page | 5 | |
| Introduction: Explain purpose of the design project and approach
1. Describe the focus of your prototype design. 2. Summarize the number of different prototypes attempted. |
(20) | |
| Procedure: Explain what you did.
a. Written explanation of design process and reasoning for choosing design. Remember you chose this design as a group. b. Written procedure of how you built your part. i. Sketch of the final design with dimensions and drawings of all parts used. Drawings used to describe the variation from your design to the production should be included along with the two other parts you analyzed. |
(20) | |
| Analysis: Analyze what happened.
a. Why did you have the results that you had? What were the design flaws, etc.? Look at your notes from your sketches. b. What would you do differently next time? Think about layout of your piece, how you cut your piece, did the design of the piece make it conducive to build out of Styrofoam? c. IF you constructed a second part…what changes would you make and why? What would be the goal of the redesign? i. What other designs did you consider and why did your group choose this design? |
(25) | |
| Conclusions: What was learned?
a. Restate purpose b. State whether your design was successful and how well it meet the requirements of this project. |
(15) | |
| Recommendations: What is to be done with this information and knowledge?
a. What would you do differently? b. What design features, how the piece was constructed etc. are best for this type of project? |
(15) | |
| Total |
Explain purpose of the design project
